Dell PowerVault NX1950 Manuel de mise à jour - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de mise à jour pour {nom_de_la_catégorie} Dell PowerVault NX1950. Dell PowerVault NX1950 18 pages. For vmware esx server software
Également pour Dell PowerVault NX1950 : Manuel de déploiement (34 pages), Informations importantes Manuel (26 pages), Pour commencer (49 pages), Manuel d'installation et de dépannage (48 pages), Manuel de déploiement (38 pages), Manuel de référence (4 pages), Mise en place (2 pages), Utilisation (2 pages), Manuel de configuration (11 pages)

5 Repeat step 1 to step 4 on the other node(s) and reboot.

NOTE:

Console are displayed when you restart the PowerVault NX1950 storage

solution. You must close the Microsoft Management Console before installing

the new Target.

6 Download the iSCSI 3.1 Software Target from the Dell Support website at

support.dell.com and install on all cluster nodes one at a time.

To uninstall the current 3.0 Target that is configured in a non-clustered

environment:

1 Close all applications.

2 From the Initiator, disconnect all Initiators from the Target(s).

3 Navigate to Add or Remove Programs and uninstall the Microsoft iSCSI

Target from the passive node(s) and allow for complete reboot.

4 Reboot the PowerVault NX1950 storage solution.

NOTE:

Console appear when you restart the PowerVault NX1950 storage solution.

You must close the Microsoft Management Console before installing the

new Target.

NOTE:

Storage Server 2003 SP2 which is a pre-requisite for the Active/Active Target

configuration.

5 Download and save the 3.1 Target from the Dell Support website at

support.dell.com on the PowerVault NX1950 storage system.

6 Install the 3.1 Target on the PowerVault NX1950 storage system.

NOTE:

create highly available iSCSI instance. Close the window and perform the

steps in "Creating a Target in a Non-Clustered Environment" on page 14 to

create a new Target.

The Dell Software Initialization Wizard and Microsoft Management

Ensure that your system is running Microsoft Windows Unified Data

After the 3.1 Target is successfully installed, you may be prompted to

Configuring 3.1 Target