Dell PowerVault TL2000 Manuel de configuration - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Dell PowerVault TL2000. Dell PowerVault TL2000 22 pages. Tape library
Également pour Dell PowerVault TL2000 : Notes de mise à jour (3 pages), Pour commencer (38 pages), Faq (26 pages), Manuel de démarrage rapide (7 pages), Manuel du logiciel (16 pages), Informations importantes Manuel (10 pages), Addendum au manuel de l'utilisateur (2 pages), Manuel de démarrage (3 pages), Instructions sur les pièces jointes (17 pages), Brochure (4 pages), Manuel de l'utilisateur (20 pages)

Dell PowerVault™ TL4000/TL2000 Failover Guide

(one host, two HBAs, two switches, two FC drives)

Main Path

Failover Reference Configuration 3:

One host with dual port SAS HBAs and one Dell PowerVault™ with two SAS drives

In this configuration, failover occurs if one of the following occurs:

‐ One of the drives fails (hardware failure or is drive disconnected from the HBA port)

‐ One of the HBA ports fails

‐ One of the ports in a drive fails

This configuration takes full advantage of path failover; it is protected via data and control path.

The physical connection of this configuration is shown in Figure 3.

Important Note: Dell Recommends Fibre Channel drives to be same generation. For Heterogonous

configurations refer to section: Heterogonous Validated Configurations

6 | P a g e

Always refer to www.dell.com\support for latest documentation and updates

Failover configuration

Failover Path

Figure 2: Reference Configuration 2

1 2 / 3 1 / 0 9 v e r s i o n 2 . 0