Dell PS4100 Manuel d'installation et de configuration - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de configuration pour {nom_de_la_catégorie} Dell PS4100. Dell PS4100 41 pages. Storage array
Également pour Dell PS4100 : Manuel du matériel (50 pages), Vue d'ensemble (7 pages), Mise en place (2 pages), Manuel de maintenance du matériel (47 pages)

Imprimer la page

Dell PS4100 Manuel d'installation et de configuration

Installation and Setup Guide

If you used the

utility to create or expand a group, or added the array to an existing group with the Remote

setup

Setup Wizard, you must set the RAID policy for the group member.

Use either the Group Manager command line interface (CLI) or the graphical user interface (GUI) to set the

RAID policy.

Using the CLI to Set the RAID Policy

To use the Group Manager CLI to set the RAID policy for a new group member:

1. Log in to the group, if you are not already logged in. (After the setup utility completes, you will still be

logged in to the group.) Use one of the following methods to connect to the group:

– Serial connection to a member. See

– Telnet or ssh connection to the group IP address.

2. At the login prompt, enter the

group.

3. At the Group Manager command prompt, enter the following command, to specify RAID6, , RAID10, or

RAID50 for the

policy

member select member_name raid-policy policy

For example, the following command configures member1 with RAID6:

member select member1 raid-policy raid6

Using the Group Manager GUI to Set the RAID Policy

For the latest information on browser support for the Group Manager GUI, see the PS Series Release Notes.

After you add a member to a PS Series group, you must set the RAID policy for the member and choose the

storage pool. The storage in the member is available after you set the RAID policy.

To use the GUI to set the RAID policy for a member:

Procedure

1. Click

and then click the group name to open the Group Summary window.

Group

2. Expand

and then double-click the member name. The GUI shows whether a member is configured

Members

or not.

3. Click

in the warning dialog to open The Configure Member – General Settings dialog.

Yes

4. Select the pool and click

5. Select the RAID policy on the Configure Member – RAID Configuration dialog.

6. [Optional] Select

Wait until the member storage initialization completes

7. Click

8. Click

in the Configure Member – Summary dialog.

Finish

Note:

After initial RAID configuration, it takes a few minutes for the Group Manager to display the total usable

capacity. The Group Manager might show a smaller amount until the process is complete.

Set Up a Serial Connection to the Array on page

account name and the password that you specified when creating the

grpadmin

variable:

. If prompted, confirm you want to assign the member to the pool.

4 Software Configuration

11.