Dell PS4100 Manuel de maintenance du matériel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de maintenance du matériel pour {nom_de_la_catégorie} Dell PS4100. Dell PS4100 47 pages. Storage array
Également pour Dell PS4100 : Manuel du matériel (50 pages), Vue d'ensemble (7 pages), Manuel d'installation et de configuration (41 pages), Mise en place (2 pages)

Imprimer la page
Dell PS4100 Manuel de maintenance du matériel
PS4100 Hardware Maintenance Guide
Item Indicator
Icon
1
Array status
LED
2
Power LED
3
Drive Release
None
Latch
Note: The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced
only by support personnel. During the array power-up sequence, these LEDs will cycle through different
states until the array is fully started and the active control module has been determined.

Back-Panel Features and Indicators

The back of a PS4100 is shown in
Table 2
describes the back panel features.
4
Table 1 Front Panel Feature Descriptions
Description
The array status LED lights when the array power is on.
• Off—No power.
• Steady blue—Array status is OK.
• Blinking blue—Administrator request to identify the array (see the
Group Administration online help).
• Steady amber—Critical status.
• Blinking amber—Warning.
The power LED is ON when at least one power supply is supplying power
to the array.
• Off—No power (both power supplies are off or not present).
• Steady green—Array has at least one power supply providing power.
• Blinking green—Array is in power standby mode.
Enables you to remove a drive from the array.
Figure
5.
Figure 5 Back-Panel Features
Basic Storage Array Information