Dell VxRail E660 Manuel d'installation et d'entretien - Page 29
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Dell VxRail E660. Dell VxRail E660 32 pages.
Également pour Dell VxRail E660 : Manuel d'installation et d'entretien (32 pages)
Imprimer la page
iDRAC Quick Sync 2
indicator code
Solid amber
Blinking amber
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC
subsystem.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or
tablet. Cable length should not exceed 3 feet (0.91 meters). Performance could be affected by cable quality. The following table
describes iDRAC Direct activity when the iDRAC Direct port is active:
iDRAC Direct LED indicator code
Solid green for two seconds
Blinking green (on for two seconds and off
for two seconds)
LED Indicator off
NIC indicator codes
Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED
indicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
1. Link LED indicator
2. Activity LED indicator
The following table describes different NIC indicator codes and condition of the connectivity:
NIC indicator codes
Link and activity indicators are off.
Link indicator is green, and activity indicator is blinking
green.
Link indicator is amber, and activity indicator is blinking
green.
Link indicator is green, and activity indicator is off.
Link indicator is amber, and activity indicator is off.
Link indicator is blinking green, and activity is off.
Condition
Indicates that the system is in fail-
safe mode.
Indicates that the iDRAC Quick
Sync 2 hardware is not responding
properly.
Condition
Indicates that the laptop or tablet is connected.
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Corrective action
Restart the system.
If the problem persists, see
Restart the system.
If the problem persists, see
Condition
Indicates that the NIC is not connected to the network.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is not being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is not being sent or received.
Indicates that the NIC identity is enabled through the NIC
configuration utility.
System diagnostics and indicator codes
Dell Technologies
Support.
Dell Technologies
Support.
29