Dell EMC S5000 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell EMC S5000. Dell EMC S5000 42 pages.

This guide provides site preparation recommendations, and step-by-step procedures for rack mounting, installing and replacing pluggable

modules, and connecting to a power source.

After you have completed the hardware installation and power-up of the S5000, for software configuration information, refer to the Dell

Networking OS Configuration Guide for the S5000 Switch and for Command Line Interface (CLI) information, refer to the Dell

Networking OS Command Line Reference Guide for the S5000 Switch.

CAUTION:

To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.

NOTE:

Only trained and qualified personnel can install this equipment. Read this guide before you install and power up

this equipment. This equipment contains two power cords. Disconnect both power cords before servicing.

NOTE:

This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.

NOTE:

When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical

transceiver ports. Avoid exposure to laser radiation and do not stare into open apertures.

Topics:

•

For more information about the S5000, refer to the following documents:

•

Dell Networking OS Configuration Guide for the S5000 Switch

•

Dell Networking OS Command Line Reference Guide for the S5000 Switch

•

Dell Networking OS Release Notes for the S5000 Switch

NOTE:

For the most recent documentation and software, visit Support

About this Guide

:www.dell.com/support

About this Guide