Dell N20 Series Manuel d'installation - Page 35

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell N20 Series. Dell N20 Series 48 pages.

Figure 22. Installing the N30xx in a Front-Rack Configuration

Switch

Mounting screw

Installing as a Free-standing Switch

NOTE:

Dell Networking strongly recommends mounting the switch in a rack.

Install the switch on a flat surface if you are not installing it in a rack. The surface must be able to support the weight of the switch and the

switch cables. The switch is supplied with four self-adhesive rubber pads.

Attach the self-adhesive rubber pads on each location marked on the bottom of the switch.

Set the switch on a flat surface. Make sure that it has proper ventilation by leaving 5 cm (2 inches) on each side and 13 cm (5 inches)

at the back.

Stacking on N30xx Series Switches

This section explains how to stack multiple N30xx series switches.

All manuals and user guides at all-guides.com

Rail bracket

N30xx Series Installation