Dell Networking 6224 Manuel de référence - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de référence pour {nom_de_la_catégorie} Dell Networking 6224. Dell Networking 6224 17 pages. Expansion modules for dell networking switches

Imprimer la page

Introduction

Dell has five groups of switches that can use the same modules interchangeably within its group. The

following groups of switches can interchange expansion modules.



Dell Networking M6220, 6224, 6224P, 6224F, 6248, and 6248P



Dell Networking M8024 and M8024-k



Dell Networking 7024, 7024P, 7024F, 7048, 7048P 7048R, and 7048R-RA



Dell Networking 8132, 8132F, 8164, 8164F, N4032, N4032F, N4064, and N4064F and MXL



Dell Networking N3024, N3024F, N3024P, N3048, and N3048P

NOTE: Whenever a module is moved from an MXL to an 81xx/N40xx or vice versa, reload the

switch for proper functioning.

Unless noted, when two bays are available on a device, the same type of modules can be installed in

both bays at the same time, or two different modules can be installed at the same time, one in each

bay. Currently, there are no more than two expansion slots in any of the Dell Networking devices.

Listed below are all possible configurations:

Bays Available

There are several CX4 expansion modules available for Dell Networking switches. Each CX4 module

listed in the sections below mentions whether it has a clip-style or screw-style connector. Regardless

of the type of connection required, Dell has cables available to complete all CX4 connections. One

such cable includes a CX4 clip-style on one end and a CX4 screw-style on the other, which may be

required when connecting certain devices. Contact your Dell Support Representative for more

information.

Expansion Modules for Dell Networking Switches

Bay Status

empty

installed

empty, empty

empty, installed

installed, empty

installed, installed

NOTE: Any two modules can be installed, of same or different

types, unless noted otherwise. For example, the stacking modules

for the 62xx and M6220 can only be installed in bay 1.