Allied Telesis AT-AR021 (S) BRI-S/T Manuel d'installation rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Allied Telesis AT-AR021 (S) BRI-S/T. Allied Telesis AT-AR021 (S) BRI-S/T 10 pages. Port interface card
Également pour Allied Telesis AT-AR021 (S) BRI-S/T : Manuel d'installation (13 pages), Manuel d'installation (13 pages), Manuel d'installation et de sécurité (8 pages)

Allied Telesis AT-AR021 (S) BRI-S/T Manuel d'installation rapide
Quick Install Guide
C613-04020-01 REV H

Models Covered By This Guide

This Quick Install Guide includes information on the following models:
AT-AR020 PRI E1/T1
AT-AR021 (S) BRI- S/T
AT-AR021 (U) BRI-U
AT-AR022 ETH
AT-AR023 SYN
AT-AR024 ASYN4
AT-AR026 4ETH
AT-AR027 VoIP-FXS
Quick Install Guide updates can be found at www.alliedtelesyn.co.nz/
support/support.html.

Package Contents

The following items are included with each Port Interface Card (PIC). Contact
your sales representative if any items are damaged or missing.
One PIC
Two retaining thumbscrews
One warranty card
The AT-AR020 PRI E1/T1 and AT-AR021(S) BRI-S/T PICs also include:
Two jumpers

Hot Swapping

The following PICs can be hot swapped if they are to be installed or removed
from an AR040 NSM, and the AR040 is installed in a switch or router running
Software Release 2.3.1 or later.
AT-AR021 (S) BRI- S/T
AT-AR021 (U) BRI-U
AT-AR023 SYN
The procedure for hot swapping PICs is described on page -7.
The following PICs cannot be hot swapped at this time.
AT-AR020 PRI E1/T1
AT-AR024 ASYN4
AT-AR027 VoIP-FXS
3