Dell Networking S4048 Manuel de démarrage - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Dell Networking S4048. Dell Networking S4048 24 pages.
Également pour Dell Networking S4048 : Manuel d'installation (44 pages)
Imprimer la page
Figure 8. Install the AC Power Supply Unit
1.
PSU
4.
Attach the power cables from the switch PSU to the external power source.
NOTE: The system is powered-up as soon as you connect the power cord between the system
and the power source.
5.
Repeat steps 1 through 3 for the second PSU.
NOTE: Ensure that the PSU is correctly installed. When you correctly install the PSU, the power
connector is on the left side of the PSU.
Installing a Fan Module
1.
Remove the fan module from the shipping box.
2.
Use the grab handle to slide the module into the switch fan slot.
CAUTION: DO NOT mix airflow directions. All fans must use the same airflow direction (I/O to
Utility or Utility to I/O).
CAUTION: Check the fans at six-month intervals and replace them as necessary. To accurately
determine replacement intervals, regularly monitor the speeds of the cooling fans.
Install the Hardware
2.
Switch slot
13