Dell Networking X1008 Manuel de démarrage - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Dell Networking X1008. Dell Networking X1008 43 pages.

3 Make sure that the switch has proper ventilation.

Wall Installation

To mount the switch on a wall:

1 Make sure that the mounting location meets the following requirements:

•

The surface of the wall must be capable of supporting the switch.

•

Allow at least two inches (5.1 cm) space on the sides for proper

ventilation and five inches (12.7 cm) at the back for power cable

clearance.

•

The location must be ventilated to prevent heat buildup.

2 Place the supplied wall-mounting bracket on one side of the switch,

verifying that the mounting holes on the switch line up to the mounting

holes on the wall-mounting bracket.

Figure 1-2. Bracket Installation for Wall Mounting

3 Insert the supplied screws into the wall-mounting bracket holes and

tighten with a screwdriver.

4 Repeat the process for the wall-mounting bracket on the other side of the

switch.

5 Place the switch on the wall in the location where the switch is being

installed.

Getting Started Guide