Dell PowerConnect B-RX Manuel de démarrage - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Dell PowerConnect B-RX. Dell PowerConnect B-RX 32 pages. Powerconnect b-rx series
Imprimer la page
1
#8 AWG power supply wire
FIGURE 16
Crimping the power supply wire in the lug
4. Re-attach the transparent cover over the power supply lugs that was removed in Step 1.
5. Connect the wire to your DC power source, making sure to connect the -48V cable to the negative terminal on
the power supply and the 0V cable to the positive terminal as marked on the power supply.
Managing cables
For information on managing cables attached to PowerConnect B-RX Series, refer to the chapter in your hardware
installation guide on using the structured cabling components.
Attaching a management station
You can manage the PowerConnect B-RX Series system in the following ways:
•
You can connect a PC or terminal to the management module's serial (Console) port for a direct connection.
From this interface, you can configure the 10BaseT/100BaseTX/1000BaseTX Ethernet (management) port with
an IP address and either Telnet or SSH. This enables you to manage the device through the
10BaseT/100BaseTX/1000BaseTX Ethernet (management) port using either Telnet or SSH.
•
You can connect the PowerConnect B-RX Series switch to your existing management network and manage the
switch, along with other network devices, from a management station. To do this, you must connect the
management module's 10BaseT/100BaseTX/1000BaseTX Ethernet (management) port to an Ethernet
network.
NOTE
The existing management network into which you can connect the 10/100 Ethernet port must be separate and
isolated from the network over which user packets are switched and routed.
For information about connecting a PC or terminal to the management module's Console port or management port,
refer to
"Attaching a PC or terminal to the Console port or Ethernet port"
a management port to a network, refer to
page 25.
24
1
"Attaching the management module's Ethernet Port to a network"
following. For information about connecting
PowerConnect B-RX Series Getting Started Guide
on
53-1001682-03