3 Day Blinds VINYL BLINDS Pour commencer - Page 2

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} 3 Day Blinds VINYL BLINDS. 3 Day Blinds VINYL BLINDS 10 pages.

Imprimer la page

OPTIONAL HARDWARE

Hold Down Brackets

with Screws

Plastic Corner

| Vinyl Blinds

Valance Corners

Valance Returns

Spacers

L-Bracket

Wing Nut and Bolt

Valance Clips

INSIDE MOUNT

• Facing the window, hold the end bracket marked "LH" in the

upper left hand corner of the window against the top and

side of the window casing.

• Position the front edge of the closed bracket:

• Flush with the front of the

window casing if you are

mounting your blind in a

window with the minimum

depth.

NOTE: Be sure to check for any obstructions such as window

cranks or which may require different bracket locations.

•

" back to have the

valance flush with the

front of the window

casing.

• Mark the window casing

through the holes in either

the side or top of the end

bracket. For maximum

stability, the marks should

be made diagonally.

• Using a drill with a

" drill

bit or an awl, make a small

pilot hole at each mark.

• Using a flathead

screwdriver, open the

latches of the end

brackets.

• Mount the bracket

using two of the screws

provided.

• Repeat this procedure for

the right end bracket.