Dell PowerEdge 350 Manuel d'installation - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell PowerEdge 350. Dell PowerEdge 350 32 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 350 : Mise à jour des informations de diagnostic du système (2 pages), Information Update (30 pages), Installation du matériel (22 pages), Manuel (15 pages)
Imprimer la page
1-20
Rack Installation Guide
6.
At the front of the rack cabinet, position one of the slide assemblies so that its
mounting-bracket flange fits between the marks or tape you placed on the rack,
marking the upper and lower edges of the template (see Figure 1-17).
The hooks on the bottom of the mounting bracket should enter the holes beside
the lower marks you made in the vertical rails.
7 .
Secure the front of the mounting-bracket flange with a 10-32 x 0.5-inch pan-head
Phillips screw in the front vertical rail (see Figure 1-17).
8.
Push back on the back mounting-bracket flange until the mounting hook locks into
the matching square hole on the back vertical rail.
9.
Repeat steps 6 through 8 for the remaining slide assembly on the other side of
the rack.
10-32 x 0.5-inch
pan-head Phillips
screw (2 per slide
assembly)
front of rack
Figure 1-17. Installing the Slide Assemblies
mounting-bracket
flange
slide assemblies (2)