Dell PowerEdge 4600 Manuel de suppression

Parcourez en ligne ou téléchargez le pdf Manuel de suppression pour {nom_de_la_catégorie} Dell PowerEdge 4600. Dell PowerEdge 4600 28 pages. Poweredge 4600
Également pour Dell PowerEdge 4600 : Information Update (14 pages), Manuel de mise à jour (42 pages), Manuel (48 pages), Manuel d'installation (42 pages), Manuel d'installation (28 pages), Manuel (19 pages), Manuel (15 pages), Spécifications (2 pages)

Imprimer la page
Dell PowerEdge 4600 Manuel de suppression
CAUTION: A CAUTION indicates a potential for property damage, personal
injury, or death.
Removing the Back Fan Assembly
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your System
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
Remove the system cover.
1
See your Installation and Troubleshooting Guide for detailed information.
Remove the cooling shroud.
2
Remove the cables from the cooling shroud's retaining clips.
a
Loosen the two thumbscrews securing the cooling shroud to the system.
b
Lift the cooling shroud up to clear the memory riser cards and the chassis.
c
See your Installation and Troubleshooting Guide for detailed information.
Remove the memory riser cards by grasping each card by the extractor tabs, located on
3
the top corners of the card, and lifting it straight up to clear the chassis.
See your Installation and Troubleshooting Guide for detailed information.
Remove the four fans by squeezing the fan release levers and lifting each fan straight
4
up to clear the fan assembly (see Figure 1).
F i g u r e 1 .
R e m o v i n g / R e p l a c i n g a Fa n
release lever
April 2003
0C1553A01