Dell PowerEdge 6400 Installation du rack - Page 32

Parcourez en ligne ou téléchargez le pdf Installation du rack pour {nom_de_la_catégorie} Dell PowerEdge 6400. Dell PowerEdge 6400 34 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 6400 : Installation du rack (37 pages), Manuel d'installation de la mise à niveau (42 pages), Manuel d'installation (42 pages), Manuel d'installation (37 pages), Manuel (10 pages), Installation (4 pages), Assemblage et installation (32 pages), Manuel (10 pages), Manuel (15 pages)

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Replacing the Rack Doors

The following subsections describe procedures for replacing the rack doors on the

42-U and the 24-U rack.

CAUTION: To prevent personal injury due to the size and weight of the

doors, never attempt to replace the doors by yourself.

Lift the front door into position, and align the hinges with the holes in the rack

(see Figure 3).

Slide the hinges into the holes in the rack until the hinge release levers lock the

hinges into position.

Close the door latch by rotating the handle counterclockwise until it stops, push

in the handle until it locks in position, and then slide the cover down over the

push button (see Figure 2).

Repeat steps 1 through 3 to install the back door, but turn the handle clockwise.

CAUTION: To prevent personal injury due to the size and weight of the

doors, never attempt to replace the doors by yourself.

Lift the front door into position, and align the hinges with the hinge inserts in the

rack (see Figure 5).

Slide the hinge pins into the hinge insert in the rack until the hinges lock into

position.

Close the door latch by rotating the handle counterclockwise until it stops, and

then push the handle in until it locks in position (see Figure 4).

Repeat steps 1 through 3 to install the back door.

This completes the rack installation for the PowerEdge system.

DELL CONFIDENTIAL - Preliminary

9/8/00