Christie 104-001101-01 Manuel d'instructions de remplacement - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de remplacement pour {nom_de_la_catégorie} Christie 104-001101-01. Christie 104-001101-01 8 pages.

Imprimer la page

Christie 104-001101-01 Manuel d'instructions de remplacement

12K / 14K / 16K / 20K Lamp & Filter Instructions

Filter Replacement Procedure

This procedure should be undertaken immediately

after Step 8 of the Lamp Replacement Procedure.

The filter, located at the front side of the projector, should be changed whenever the lamp

is replaced. If operating in an extremely dusty environment the filter may have to be

replaced sooner. Use the filter provided in the Christie approved Lamp and Filter Kit for the

specific projector model. For more information, refer to Table 1. Projector Models.

STEP 1 — TURN OFF THE PROJECTOR, COOL and UNPLUG

Before removing or installing a filter, turn off the projector and allow it to cool for five

minutes before unplugging.

STEP 2 - REMOVE FILTER DOOR

Loosen the ¼-turn screw at the top of the filter grille/door. Lift the door away from the

projector. Refer to Figure 7.

013-100049-03 (Rev.1)

NOTE

When operating a Roadster S+20K

also remove the triangular metal filter brace.

Figure 7. Remove Filter Door

6 of 8 Pages