Dell S3100 Series Manuel de démarrage - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Dell S3100 Series. Dell S3100 Series 46 pages.
Également pour Dell S3100 Series : Manuel d'installation (45 pages), Manuel de démarrage (27 pages)
Imprimer la page
13. SFP+ (10G) port ACT.
14. SFP+ (10G) port LNK.
15. Combo SFP (1G) port ACT.
16. Combo SFP (1G) port LNK.
Table 3. S3124P I/O Side LED Descriptions
Feature
Gigabit Ethernet
(10/100/1000BASE-T) RJ-45 port
Console port
Management port
Stack number
Temperature
PSU 1 and 2
System status
Fan
M (Master)
18
Detailed Description
LNK (Link speed):
•
Green — link up at 1000 Mbps speed.
•
Yellow — link up at 10/100 Mbps speed.
•
Off — no link.
ACT (Data transmission):
•
Blinking green — activity.
•
Off — no activity.
LNK (Link speed):
•
Off — no link.
•
Solid green — link.
LNK (Link speed):
•
Off — no link.
•
Solid green — link on 1 G speed.
•
Solid amber — link on 100 M or 10 M speeds.
ACT (Data transmission):
•
Blinking green — activity.
•
Off — no activity.
•
Displays the stack unit number of the switch.
•
Displays 1 if switch is not part of a stack.
•
Solid green — system temperature is below threshold limit.
•
Solid red — system temperature has exceeded the threshold
limit of 75°C.
•
Off — power failure or no power.
•
Solid green — normal operation.
•
Blinking green — locator function is enabled.
•
Solid green — normal operation. The CLI prompt is available.
•
Blinking green — boot-up in progress.
•
Solid red — critical system error.
•
Blinking red — noncritical system error (fan fail, power supply
fail).
•
Solid green — fan is powered and running at the expected rpm.
•
Solid red — fan failed.
•
Solid green — system is in Stacking Master mode.
S3100 Series Hardware Overview