Allied Vision MANTA Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Allied Vision MANTA. Allied Vision MANTA 18 pages.

Imprimer la page
You have access to the sensor now.
9. Continue with
9.3. Removing the taped cover glass
9.3. Removing the taped cover glass
Ease handling
• Use a magnifying glass for better view.
• Read the instructions thoroughly and keep tools at hand for camera
Use of the term "camera" in this section
In this section, the term "camera" includes sensor units of Prosilica GT cameras.
Required tools
Before you can remove the TCG, please obtain the required tools shown below.
Required tools
Base magnifier or microscope Magnifying glass
Wooden spatula
Precision screwdriver
Pinch nose pliers
Circular protection foil
(optional)
Table 3: Required tools to remove a TCG
Sensor
Figure 18: sensor unit and sensor
preparation.
Tools short names
Spatula
Screwdriver
Pliers
Circular protection foil To protect the sensor during camera storage
Page 12 of 18
Preparing Cameras without
on page 12.
Purpose
For better view
To keep the cover glass in position until removed
To lift up the adhesive tapes
To pull off the adhesive tapes
before final hardware installation
Sensor Cover Glass