30 Second Smile TSS300 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 30 Second Smile TSS300. 30 Second Smile TSS300 10 pages.

Imprimer la page

CARING FOR YOUR 30 SECOND SMILE

CLEANING YOUR 30 SECOND SMILE

NOTE Cleaning Instruction: Do not clean handle in running water. Clean

handle with dry cloth only. Handle is not water-proof.

While toothbrush unit is running, rinse brush head only under hot running water

after each use and be sure all toothpaste is removed. Periodically clean handle

with a dry cloth.

CHARGER

Make sure the charger pin is clean in order for it to charge the toothbrush handle

properly. Note that the charging base is not dishwasher safe. Unplug the charger

and use a damp cloth to wipe the surface.

STORAGE

The counter top base stores the handle and also provides hygienic storage for extra

brush heads. Store brush heads with bristle end up.

ELECTRICAL SPECIFICATIONS

Input Power:100/240V-50/60Hz

Cord: 4 feet, 2-prong plug

Power Consumption: 1.5 watt

Remove brush heads weekly and clean

the metal pins including the small groove.

TROUBLESHOOTING FAQ

- Problem: Brush head plastic hits my teeth.

- Solution:

You are not using the brush according to instructions. Please review the

instructional video on our web site at:

www.30secondsmile/demo, for step-by-step brushing instructions.

- Problem: Brush won't operate.

- Solution:

Charge the brush on the Charging Base for at least 12 hours.

- Problem: My gums are sore after using the 30 Second Smile

- Solution:

Some soreness is normal as the toothbrush is reaching areas not

previously reached. Continue using the 30 Second Smile

but be sure to use the RED-ULTRA SOFT bristled brush heads on

low speed for the first several weeks.

- Problem: My gums are bleeding.

- Solution:

Make sure you are using the RED-bristled ultra soft brush heads. If not,

switch to it immediately. If you are, please note that your 30 Second

Smile

toothbrush is self-positioning and brushes areas that have been

missed with other toothbrushes. Some bleeding during the first 3-5 days

of use is normal. If bleeding continues for more than 1 week, stop using

and contact customer service.

- Problem: Metal pins at the end of handle are not even.

- Solution:

The tips of the metal pins are never aligned. Depending on where the

brush starts/stops, one pin will always be longer than the other.

- Problem: Brush head falls off.

- Solution:

Push brushes all the way onto the metal pins until you feel and hear

a "snap."

- Problem: I cannot remove brush heads.

- Solution:

Depress the release button on brush heads. Firmly tug on the brush

head to completely remove. To avoid this problem in the future,

remove brush heads weekly and clean the metal pins, including

the small groove.

NOTE: Do not use 30 Second Smile in shower, and do not clean handle with running

water. Handle is water resistant but not water-proof.

toothbrush.

toothbrush