EarthQuake IQ600 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} EarthQuake IQ600. EarthQuake IQ600 12 pages. Digital feedback class “j” subwoofer amplifier 600wrms
Imprimer la page
Amplifier Specifications
POWER OUTPUT
FREQUENCY RESPONSE
TOTAL HARMONIC DISTORTION
SLEW RATE
SIGNAL TO NOISE RATIO
LOAD IMPEDANCE
DAMPING FACTOR
CONTROLS
INPUT CONNECTIONS
OUTPUT CONNECTIONS
MODE SWITCHES
PROTECTION CIRCUITRY
POWER REQUIREMENTS
IQ-600R=10A
SIZE AND WEIGHT
Specifications Are Subject To Change Without Notice
1 x 700 watts RMS @ 4 ohms Mono (1% distortion)
1 x 700 watts RMS @ 2 ohms Mono (1% distortion)
1 x 350 watts RMS @ 8 ohms Mono (1% distortion)
20Hz-2kHz
<0.08%, (1W/4ohm)
50 volts / microsecond
> 106dB (balanced) 105dB (unbalanced) @ rated power
2 ohms or greater
> 500
Power • Room equalization • Room equalization IN/OUT • Subsonic
filter • Phase shift • Lowpass, Bypass • Channel and power status
LEDs • Dual gains internally mixed • Music sensing ON/OFF • DC
turn ON/OFF
XLR / RCA • High-level
Binding posts • Locking mechanism
Phase switch 0¡ / 180¡ - Variable time delay 0 to 20 millisecond
Short circuit, open circuit, RF burnout, over temp, turn on/off transient
protection, DC protection, limiter circuitry
110-120VAC~/60Hz
H=1.7" x W=19" x D=14.5"
44mm x 483mm x 367mm
18.04lbs. • 8.2Kg
IQ Suboowfer Power Amplifier
9