EarthQuake MiNi D2500 Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} EarthQuake MiNi D2500. EarthQuake MiNi D2500 16 pages. Mini d amp
Également pour EarthQuake MiNi D2500 : Manuel d'installation (7 pages), Manuel d'installation (13 pages)
Imprimer la page
MiNi D AMPLIFIER
Test the alternator output. Factory alternators will produce 60 - 80 amperes at
best. Wear and heat will reduce the output by 40%.
Alternator ground (-) must be reinforced. Use a 4-gauge cable instead of the
factory 8-gauge.
Alternator positive (+) to battery (+) must be reinforced. Use 4-gauge cables.
Check your battery condition as batteries degrade after a while.
Battery (+) to amplifier (+) must be connected using a 4-gauge cable.
Ground amplifier to vehicle's chassis (bare metal) using 4-gauge cable, keep
the cable short (2 feet max).
Use 1 Farad capacitor to compensate for surges in demand.
We recommend the use of one (1) auxiliary battery.
6
Specifications are subject to change without notice