Award CHO83-900 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Award CHO83-900. Award CHO83-900 12 pages.

• When the range hood is located above a gas
appliance, this distance shall be at least 65 cm
between the supporting surface for the
cooking vessels on the hob and the lowest
part of the range hood. See pic 1.
• When installing on wall: drill 3 holes Ø8mm
100mm apart (on a suitable surface that will
hold the weight of the hood) in line with the
hook on the hood.
• Insert expended screws into the holes.
• Fix the hook on the wall, place drilling template on the hook. See pic 2.
• Fit the ducting (Not included with the range hood) to the one way valve,
and run it outdoor. See pic 3.
• Calculate the final height of the U-shaped section, pull out the inside U-
shaped section to a suitable height. (See pic 4). Finally, drill 2 holes
Ø8mm in line with the 2
Put the inside U-shaped on the 2
pic 4A).
Note: Fix the Canopy with safety screws. See Pic 5. The two safety screw holes
are positioned on the back casing, with diameter of 6mm.
Warning: Failure to install the screws or fixing device in accordance with these
instructions may result in electrical hazards.

(2) INSTALLATION

nd
plate. Insert expended screws into the holes.
nd
plate and tighten the two screws (see