Award CS1-903S Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Award CS1-903S. Award CS1-903S 15 pages.

INSTALLATION (VENT OUTSIDE)

INSTALLATION

If you have an outlet to the outside, your range hood can be connected as below

picture by means of an extraction duct (enamel, aluminium, flexible pipe or non-

flammable material with an interior diameter of 150mm)

1. Before installation, turn the unit off and unplug it from the outlet.

2. The range hood should be placed at a distance of 65~75cm above the cooking

surface for the best effect.

3. Install the hook on a suitable place once the installation height is set, and keep it

level. The fixed position of the inside chimney bracket is the location of chimney. See

pic 2.

4. Install the expansion pipe on the outlet as shown below. Fix the expansion pipe on

the outlet with a cable tie. Note: The expansion pipe is not included with the product.

Then hang the range hood on the hook. See pic 3.