Award PPS6031 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Award PPS6031. Award PPS6031 13 pages.

 When the range hood is located above a gas

appliance, this distance shall be at least 65 cm

between the supporting surface for the cooking

vessels on the hob and the lowest part of the

range hood.

 Make a cut-out in the joinery as follows: wide 490*265(mm) for

52CM and 665*265(mm) for model 70CM. Pic 1. Make sure you

have at least 35mm clearance from the edge of the cut-out to the

joinery.

 Remove the filter and remove the screws holding the panel

 Use the fixing screw supplied to attach range hood to joinery

 Reinstate panel to body and fit filter

 Connect ducting to hood outlet

 The air must not be discharged into a flue that is used for

exhausting fumes from appliances burning gas or other fuels;

 Regulations concerning the discharge of air have to be fulfilled.

 The range hoods are intended to be installed over a hob having not

more than 4 hob elements.

The size of cavity:

(3) INSTALLATION