Award H102B Mode d'emploi - Page 8

Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} Award H102B. Award H102B 16 pages.

Imprimer la page

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
 If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like noodles
cooking.
Start up / Stop the booster function:
Action
Zone selection
Increase power
Start up the booster
Stop the booster
Power management:
The cooking hob is equipped with two booster functions. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of another heating zone. The display is blinking on [ 9 ] during a few seconds and
then shows the maximum of power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer can be used simultaneous with all 4 heating zones and this with different time settings
(from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the times reaches [ 00 ].
To stop the cooking time:
Action
Zone selection
Select « Timer »
To stop the « Timer »
Control panel
press key [
] from booster zone
press key [ + ]
press key [ + ]
press key [ - ]
The other heating zone:
[ 9 ] goes to [ 7 ] depending the type of zone
Control panel
press key [
]
press key [ + ]
press simultaneously [ - ] and [ + ]
press key [ - ]
press key [ + ]
Control panel
press key [
]
press simultaneously [ - ] and [ + ]
press [ - ]
8
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ P ]
[ 9 ]
(example: power level 9)
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ]
30,29....
time increase
Display
[ 0 ]
the remaining time
[ 00 ] then stops