Earthwise Electronics ComfortZone Manuel du propriétaire - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Earthwise Electronics ComfortZone. Earthwise Electronics ComfortZone 14 pages. Therapeutic infrared heating systems
Imprimer la page
Page 15
Frequently Asked Questions
Q. Why is my heater still running after I have turned it off?
A. You will hear the heater fan running after you have turned the power off—this is
to allow the heater to cool down, protecting the unit's components from
overheating. Please take care to not unplug the heater while is in operation and
while it is running the cool‐down cycle.
Q. Can I use the heater to heat multiple rooms at the same time?
A. The heating capability will depend on your floor plan, the insulation factor and
the room size. Ceiling fans will help move heat around in rooms with many large
windows but normally this is not necessary. Placing the heater in a central location
will also help move heat between rooms.
Q. Will my heater work in damp or moist areas?
A. Using the heater in a damp or moist area such as a bathroom, pool room, or
sauna room is effective but not recommended for the heater unless in constant
use. Although the heater is designed to work effectively with natural humidity, we
suggest you keep the heater away from areas that accumulate moisture.
Q. Will my heater work in areas without insulation?
A. The heater will work in garages, basements and unfinished rooms. However,
please bear in mind that the effectiveness of your heater depends on how well the
area is sealed and insulated. As with any heater, the better the walls, floor and
ceiling are sealed and insulated, the more heat is absorbed into the objects in the
room.
Q. Why is my heater's display showing only a line of dots?
A. The heater goes to a screen saver mode 10 minutes after you finish setting it.
Your heater will activate the heat cycle automatically when the temperature of the
room falls below the temperature you set. The heater will also pop out of screen
saver mode when any button is pressed on the Control Panel. Screen Saver mode
does not affect normal operation.
Q. Can I use multiple heaters in an area?
A. Depending on the size of the area, you may wish to use multiple heaters. Many
heaters may be used. Your heater is rated at 12.5 amps so each heater must plug
into an independent 15 amp, or greater, circuit.
Q. How does the ComfortZone™ Infrared Heater save me money?
A. The patented quartz heating elements in the ComfortZone produce infrared
heat waves which heat objects in the room quicker than conventional radiant heat
waves. Using this type of heat can save up to 50% on your heating bill.
Customer/Warranty Service: (866) 446-2864
Maintenance Instructions
The only maintenance that is required for the heater is the periodic cleaning of
the heater's electrostatic filter (located at the back of the unit). This cleaning
should be performed at least once a month, or as dust becomes visible on the
filter, to ensure efficient operation of the heater.
Cleaning the Electrostatic Filter
1. Power the heater off by pressing the POWER button, located on the left side
of the Control Panel. (NOTE: The sound of the heater's fans will continue
until the heat has been completely vented, thus protecting the unit and
preventing waste by cycling the remaining heat into the room. (NOTE: DO
NOT unplug the heater until the sound of the fan has stopped. Doing so may
cause damage to the unit.)
2. When the heater's fans have stopped (the heater will become completely
silent), unplug the heater .
3. Release the electrostatic filter by pushing the filter up from below (Figure 1).
4. R emove the electrostatic filter by pulling the filter down and out (Figure 2).
5. Clean the filter by vacuuming the filter until clear.
6. R eplace the filter by sliding the top upwards into the spring‐loaded slot on
the back of the heater, then gently press the bottom of the filter into place.
Figure 1
Figure 2
©2008 EarthWise Electronics, Inc
Page 12