ALLIGATOR sens.it RetroFIT-kit 2.0 Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} ALLIGATOR sens.it RetroFIT-kit 2.0. ALLIGATOR sens.it RetroFIT-kit 2.0 18 pages. Pressure monitoring system

Imprimer la page

1.10.2 Temperature too high

\ | /

/ | \

If a temperature of 95°C is exceeded, the alarm diode blinks for 10 seconds.

The current temperature value blinks alternatingly with an exclamation mark (!) at

the relevant position for as long as the threshold value is exceeded.

1.10.3 Display / receiver battery weak

If the battery voltage reaches a critical value, the battery symbol blinks

continuously. Please replace the battery (type CR2450) as soon as possible.

1.10.4 Sensor battery status critical

If "Lo" appears at a tyre position on the display, please contact a tyre specialist

company or workshop to replace the sensor.

If the outside temperature is below 10°C, this message can be disregarded. Once

the temperature rises above 10° C, the system will work again in the accustomed

manner.

\ | /

/ | \