Christie 140-133108 Series Fiche d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} Christie 140-133108 Series. Christie 140-133108 Series 17 pages. Ultra short throw lens installation
Imprimer la page
c) Continue with the last step in this procedure .
10. If using the lens support bracket with Christie One Mount, complete the following steps:
a) Place the lens support bracket assembly on the bottom of the projector.
b) Position two pillars of Christie One Mount to the lens support bracket and the other two
pillars on the projector as shown below.
c) To fasten the two rear pillars of Christie One Mount to the projector, install the two M3x8
hex screws (no washers required) provided with Christie One Mount.
d) Fasten the two front pillars of Christie One Mount to the lens support bracket assembly.
•
For 700-GS, 850-GS, and 1075-GS, install the two M6x65 screws and two M6
washers.
•
For 630-GS and 635-GS, install two M6x55 screws.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
10