Christie CineLife+ CP4435-RGB Remplacement - Page 7
Parcourez en ligne ou téléchargez le pdf Remplacement pour {nom_de_la_catégorie} Christie CineLife+ CP4435-RGB. Christie CineLife+ CP4435-RGB 7 pages. Christie rack mount pedestal
Également pour Christie CineLife+ CP4435-RGB : Manuel d'installation et de configuration (19 pages)
Imprimer la page
Completing the installation
After replacing the diffuser and depolarizer, re-install the projector components and complete laser
configurations.
1. Re-install the integrator assembly and other projector components removed to access the
integrator assembly.
2. Complete the following laser configurations:
•
Run LiteLOC calibration.
See the "Performing the LiteLOC
board instruction sheet (P/N: 020-103100-XX) or LiteLOC
projectors instruction sheet (P/N: 020-103436-XX).
•
Create or adjust the laser configuration files.
•
Create MCGD files.
•
Create PCT files, if applicable.
Technical support
Technical support for Christie Cinema products is available at:
•
•
+1-877-334-4267
•
Christie Professional Services: +1-800-550-3061 or [email protected]
Replacing the Cinema 4K-RGB Diffuser and Depolarizer Instruction Sheet
020-103544-05 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Replacing the Cinema 4K-RGB diffuser and depolarizer
™
v1 calibration" topic in the Upgrading the color sensor
™
calibration for cinema
7