Miele PW 6241 Instructions d'utilisation et d'installation - Page 39

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele PW 6241. Miele PW 6241 44 pages.
Également pour Miele PW 6241 : Instructions d'utilisation et d'installation (44 pages), Manuel d'utilisation (46 pages), Manuel d'instructions de programmation (48 pages)

Electrical connection

All electrical work must be performed by a

qualified service technician in accordance with

applicable codes and standards.

When installaing a residual current device (RCD) a

Type B GFCI circuit breaker must be installed.

The connecting terminal is located behind a cover.

The machine must only be connected to the voltage

and frequency shown on the data plate.

The machine is equipped with a multi-tap

transformer.

Steam heated washers are factory set to

3 phase, 208 V, 60 Hz

They can be converted to

3 phase, 240 V, 60 Hz by a Miele Service Technician.

Electrically heated washers are factory set to 3

phase, 230 V, 50/60 Hz

They can be converted to

3 phase, 208 V, 60 Hz by a Miele Service Technician.

Equalizer

Secure the potential equalizer, if necessary.

To activate the heating the water level in the drum

must be 4

" (110 mm) high.

A motor overload protection is located in the motor

winding.

See the enclosed wiring and installation diagrams.

Installation Instructions

Steam connection

The steam connection must only be connected by a

certified installer. For more information see the

enclosed installation plan and the installation manual.

Connecting the dispensing pumps

The connecting terminal for 4 time controlled

dispensing pumps is located behind the cover next to

the electrical connection. See the supplied wiring

diagram.

The dispensing pumps can be operated without the

multifunction module.