Miele WDA 210 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Miele WDA 210. Miele WDA 210 2 pages.
Imprimer la page
Delay start/Extras
Detergent
Delay start
Extras
Miele recommended detergents
With Delay start you can delay the start
You can use the Extra option buttons to
Miele
of the programme. The start of the pro-
augment the wash programmes.
Programmes
UltraWhite
gramme can be delayed from 30 minutes
Cottons
up to a maximum of 24 hours. This allows
Short
you to make use of night-time economy
For light soiling with no visible staining.
Minimum iron
–
electricity rates, for example.
The wash duration is reduced.
Automatic plus
–
Dark garments/
Selecting Delay start
Pre-wash
–
Denim
For laundry with large amounts of dirt, e.g.
Make sure the programme selector is at
dust and sand.
Express 20
–
the Finish position.
Shirts
The Delay start indicator will flash in the
Soak
Woollens
–
display.
For heavily soiled and stained items with
You can now use the Start button to select
protein stains.
Delicates
–
the Delay start time you want.
A duration of between 30 minutes and 2
ĺ
Drain/Spin
–
Press the Start button. Each press of the
hours in 30-minute increments can be cho-
Separate rinse/
button increases the Delay start time:
sen for the soak process (see "Programma-
–/–
Starch
– by 30 minutes up to 10 hours,
ble functions" in the operating instructions).
– by 1 hour from 10 hours upwards.
= Recommended; – = Not recommended
Holding the Start button pressed in auto-
Water plus
matically increases the duration up to 24
The water level in the main wash and the
hours.
rinses will be increased.
You can programme other options for the
Dispensing fabric softener and liquid
Changing the Delay start time
Water plus button. These are described in
starch at the end of the programme
It is not possible to alter the Delay start time
"Programmable functions" in the operating
after the programme has been selected.
instructions.
Deleting the Delay start time
ĺ
Press the Start button again when
appears in the display.
Cancelling Delay start after you have
ĺ
pressed the Start button
Add the fabric softener or the liq-
ĺ
Cancel the programme.
uid starch to compartment . Do not
exceed the maximum level mark.
It will be automatically dispensed in the final
rinse. At the end of the programme a small
amount of water remains in the fabric sof-
tener compartment.
If starching frequently, thoroughly clean
the dispenser compartment, especially
the siphon tube, regularly.
Cleaning and care
The right amount to dispense will
Cleaning the drum (Hygiene info)
depend on the following:
Washing at low temperatures and/or using
Miele
Miele
Miele
– The soiling level of the laundry.
liquid detergent can cause bacteria and
UltraColor
WoolCare
fabric softener
unpleasant odours to build up in the wash-
–
Lightly soiled:
ing machine. In order to clean the drum and
–
No visible dirt or stains. Possibly slight
also to prevent unpleasant odours building
body odour.
up, run a programme with a temperature of
–
at least 60°C using powder detergent once
–
Normally soiled:
a month or when the Hygiene info light
Visibly dirty and/or just a few slight stains.
comes on.
–
Heavily soiled:
–
Soiling and/or stains clearly visible.
–
– The quantity of the laundry.
–
– Check with your local water supplier if
–
–
–
you do not know the hardness level in
–/–
–/–
/–
your area.
Adding fabric softener or liquid starch
separately
Prepare the starch in accordance with the
manufacturer's instructions on the pack-
aging.
ĺ
Add fabric softener to the compart-
ment.
ĺ
Add liquid starch to the compartment
and powder or viscous starch to the
compartment.
ĺ
Select the Separate rinse/Starch pro-
gramme.
ĺ
Change the spin speed if necessary.
ĺ
Press the Start button.
Problem solving guide
Cleaning the detergent dispenser
Cleaning the detergent dispenser
To switch off the fault indicator: Switch the washing machine off with the button and turn
drawer
drawer housing
the programme selector to Finish.
Problem/Fault message
Washing at low temperatures and the use
of liquid detergent can lead to a build-up
The Anti-crease/Finish indi-
cator light is not on or the
of mould and bacteria in the detergent
dispenser drawer.
Start button is not flashing.
ĺ
For hygiene reasons, clean the entire
drawer at regular intervals.
ĺ
Pull out the
ĺ
detergent
Use a bottle brush to remove deter-
dispenser drawer
gent residues and limescale from the jets
The Check drainage fault
until a resistance
inside the detergent dispenser drawer
indicator light flashes and a
is felt.
housing.
fault number appears in the
display.
ĺ
The Check inlet fault indica-
Press down the release button and, at
tor light flashes and a fault
the same time, pull the drawer right out of
number appears in the dis-
the machine.
ĺ
play.
Clean the detergent dispenser drawer
with warm water.
The Check inlet and Check
drainage fault indicator
Cleaning the siphon and the fabric
lights flash and a fault num-
ber appears in the display.
softener channel
ĺ
Pull the siphon
The Soak/Pre-wash or
Rinses indicator light
out of the
compartment
flashes in the programme
and clean it
sequence display and a
under warm
fault number appears in the
running water.
display.
The Hygiene info check
ĺ
ĺ
Clean the siphon tube in the same way.
indicator light comes on.
Refit the siphon.
寮
Liquid starch can cause the siphon
to become clogged. Make sure that you
The Check dosage check
clean the siphon and siphon tube particu-
indicator light comes on.
larly thoroughly after using liquid starch a
few times.
Problem/Fault message
Possible cause and remedy
The Main wash or Rinses
The washing machine has detected a fault during the
indicator light flashes in the
wash programme.
Possible cause and remedy
ĺ
programme sequence dis-
Restart the programme. If this fault message continues
ĺ
There is no power to the machine.
play and a fault number
to appear in the display, contact Miele.
Check whether the mains plug is plugged in and
appears in the display.
switched on.
ĺ
The Anti-crease/Finish indi-
The programme selector was moved to another position
Check whether the fuse or circuit breaker has tripped.
ĺ
cator light flashes in the
after the programme had started.
Check whether the door is closed properly.
ĺ
programme sequence dis-
Turn the programme selector back to the original posi-
The washing machine has switched off automatically to
tion.
play.
save energy.
ĺ
The drum door cannot be
The machine is not connected to the electricity supply
Switch it back on with the button.
opened by pressing the
and/or is not switched on.
ĺ
The water outlet is blocked.
ĺ
Door button.
Insert the plug in the socket and switch on, and/or
Clean the drain filter and the drain pump (see the oper-
switch the machine on with the button.
ating instructions).
Power cut.
ĺ
Open the door as described in "Opening the door in the
The water inlet is blocked.
ĺ
event of a blocked drain outlet and/or power failure" in
Turn on the tap.
the operating instructions.
The filter in the water inlet is blocked.
ĺ
The door was not correctly engaged.
Clean the filter (see the operating instructions).
ĺ
Press hard against the lock side of the door and then
The anti-flooding system has reacted.
ĺ
press the Door button.
Turn off the tap.
ĺ
There is still water in the drum and the machine is una-
Call Miele.
ble to drain.
ĺ
Clean the drain filter and the drain pump.
There is a fault.
ĺ
Restart the programme. If this fault message continues
For safety reasons, the door cannot be opened if the
suds temperature is higher than 55°C.
to appear in the display, contact Miele.
ĺ
Allow the programme to finish or cancel it and wait until
the temperature in the drum has dropped.
A programme of at least 60°C has not been run for a long
period of time.
ĺ
In order to prevent bacteria and unpleasant odours
building up in the machine, run the Cottons 90°C pro-
gramme using powder detergent.
Excessive foam has built up during washing.
ĺ
Use less detergent next time and follow the manufac-
turer's instructions on dosage given on the packaging.
Quick Start Guide
Washing machine
These short instructions are not a substitute for the operating instructions supplied with
the appliance. Please read the operating instructions supplied with your washing machine
before using it for the first time and take note of the Warning and Safety instructions, as
well as the full descriptions on how to use your appliance.
en - AU, NZ
M.-Nr. 09 807 520