Miele WS 5323 Manuel d'utilisation - Page 27
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele WS 5323. Miele WS 5323 36 pages.
Problem solving guide
PROGRAMME 25
PROGRAMME STOP
IMBALANCE SWITCH
Press the On-Off switch.
Press the Mains off Z and the Mains on Y
switches.
PROGRAMME 25
PROGRAMME STOP
PRESSURE MONITOR FAULT
Call the Service Department.
PROGRAMME 25
PROGRAMME STOP
DISPENSING SYSTEM FAULT
Dispensing container 1 empty.
Change the dispensing container.
PROGRAMME 25
PROGRAMME STOP
HEATING SYSTEM FAULT
Dry step switch has cut out.
Call the Service Department.
Large articles of laundry stretching during
the spin cycle
Large articles of laundry (e.g. table cloths) might
stretch during the spin cycle. This can generally
be prevented by reprogramming the machine.
Procedure:
Reprogramme programmes from switch set-
ting 14
Drain valve: programme to no
Drain with tumble: programme to no
Spintime with drain: programme to 7 mins.
COTTONS
COTTONS
COTTONS
COTTONS
Possible reasons for increased levels of
foaming:
– detergent type
Only use detergent formulated for use in
commercial washer extractors. Domestic
laundry detergent is not suitable.
– overdosing of detergent
Dispense detergent following the deter-
gent manufacturer's instructions on the
packaging and in accordance with local
water hardness levels.
– detergent creates too much foam
Use a lower foaming detergent or contact
your detergent application specialist.
– very soft water
In areas with hardness level 1 dispense
less detergent in accordance with the
detergent manufacturer's instructions.
– soiling level of the laundry
For lightly soiled laundry dispense less
detergent in accordance with the deter-
gent manufacturer's instructions.
– residues, e.g. detergent are left on
laundry
Run an additional pre-wash without deter-
gent and without selecting a temperature.
Laundry which has been soaked before
washing must be thoroughly
rinsed before running a wash programme.
– small loads
Reduce the amount of detergent dis-
pensed according to the size of the load.
– drum speed too high during the wash
(Profitronic-controls)
Reduce the drum speed and wash rhythm.
27
M.-Nr. 05730940