Miele NOVOTRONIC G 842 SC PLUS Manuel d'utilisation - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Miele NOVOTRONIC G 842 SC PLUS. Miele NOVOTRONIC G 842 SC PLUS 48 pages. Miele dishwasher user manual
Également pour Miele NOVOTRONIC G 842 SC PLUS : Manuel d'utilisation (49 pages)
Imprimer la page
- 1. Table of Contents
- 2. Changing a Program
- 3. Program Guide
- 4. Frequentjy Asked Questions
- 5. After Sales Service
- 6. Transport
- 7. User Maintenance Instructions
- 8. Cleaning the Filter in the Wash Cabinet
- 9. Cleaning the Spray Arms
- 10. Cleaning the Wash Cabinet
- 11. Cleaning the Door and Door Seal
- 12. Cleaning the Exterior
- 13. Cleaning the Water Inlet Filter
- 14. Cleaning the Drain Pump and Non-Return Valve
Before
using for the first time
[] Press the "Start" button.
The "Start" indicator will light.
[] Turn the program selector to "Stop".
[] Turn off the dishwasher with the
"On/Off" button.
The programmed water hardness is
stored.
Checking
the programmed
water
hardness
[] Make sure the dishwasher is turned
off.
[]
[]
Turn the program selector to "Stop".
Press and hold the "Start" button and
at the same time turn on the dish-
washer with the "On/Off" button. Re-
lease the "Start" button within two
seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
[] Turn the program selector clockwise
until the "Start" indicator comes on.
The position where the "Start" indicator
comes on corresponds
to the pro-
grammed water hardness (see table
"Programming the water softener").
[] Turn the program selector to "Stop".
[] Turn off the dishwasher.
16