Miele DA 1160 Instructions d'utilisation et d'installation - Page 29
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 1160. Miele DA 1160 40 pages. Built-under ventilation hood
Également pour Miele DA 1160 : Information (4 pages), Instructions d'utilisation et d'installation (32 pages), Instructions d'utilisation et d'installation (32 pages)
Imprimer la page
Installation under a wall unit
There are several holes on the top for
installing the appliance under a wall
unit. A drilling template is supplied for
correct positioning.
Use only the fixing points as shown
on the drilling template and the
screws supplied.
Incorrect fitting can lead to damage
to the rangehood and could
compromise electrical safety (e.g.
electric shock).
When selecting the installation
position, ensure that the recirculation
grille at the front of the appliance will
not be covered by the wall unit.
Adhere the cut-out drilling template to
the bottom of the cabinet.
Drill four fixing holes 5 mm through
the bottom of the wall unit.
For air extraction mode an additional
cut-out of at least 170 mm must be
made in the bottom of the unit.
If the mains connection cable is to be
fed through the wall unit, a hole will
also need to be cut out in the bottom
of the wall unit.
Lift the rangehood up under the wall
unit and feed the connection cable
through the respective hole in the
bottom of the wall unit.
From the inside of the wall unit, fasten
the rangehood to the wall unit using
the screws provided.
Refit the grease filters.
Installation
29