Miele DA 196-2 Manuel d'utilisation et d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 196-2. Miele DA 196-2 32 pages. Cooker
Imprimer la page
There are three retaining plates A, B and
C for fixing the cooker hood to the wall.
First of all drill the holes for attaching the
canopy and for fitting retaining plate A.
18
^ Before fitting the retaining plate draw
a vertical line centrally above the hob
on the back wall.
^ Mark measurement
surface upwards (see "Appliance di-
mensions"). This marks the height of
the lower rim of the cooker hood.
^ DA 196-2:
Drill an 8 mm C hole on the middle
line, 18 mm above the height marked
. Insert an S8 plug into the hole.
^ DA 199-2:
Drill two 8 mm C holes, 18 mm above
the height marked
and left of centre. Insert S8 plugs.
^ Drill two 8 mm C holes, one at
+ 100 mm and one at
on the centre line for the retaining
plate (see "Appliance dimensions").
Insert S8 plugs.
from the hob
and 250 mm right
+ 425 mm