Miele DA 2050 Instructions d'utilisation et d'installation - Page 18

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 2050. Miele DA 2050 28 pages. Cooker
Également pour Miele DA 2050 : Manuel d'utilisation et d'installation (28 pages)

Imprimer la page

Installation

Fitting the non-return flap

(Air extraction mode only)

^ If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted onto the

exhaust socket in the motor unit. The

flaps must open upwards.

Building in

The rangehood is intended to be built

into wall units, rangehood housing

units, and above breakfast bars or

island areas.

Check prior to installation that the top of

the appliance will be accessible after

installation.

If this is not the case, install the exhaust

ducting and prepare the electrical

connection before installation.

^ Place the appliance in the cut-out

from below and align it.

^ Secure the rangehood by the frame

using 3.5 x 16 mm screws.

^ Before using the appliance for the

first time, take the grease filters out

and remove the protective foil from

the filter frame. Then replace the

grease filters.