Miele DA 2360 Instructions d'utilisation et d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 2360. Miele DA 2360 36 pages. Ventilation system
Également pour Miele DA 2360 : Instructions d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (36 pages), Instructions d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (36 pages)



Be certain your appliance is properly installed and grounded by a

qualified technician. To guarantee the electrical safety of this

appliance, continuity must exist between the appliance and an

effective grounding system. It is imperative that this basic safety

requirement be met. If there is any doubt, have the electrical system

of the house checked by a qualified electrician.



Reliable and safe operation of this hood can only be guaranteed if

it has been connected to the electrical supply.



To avoid damaging the ventilation hood, make sure that the

connection data (voltage and frequency) on the data plate

correspond to the building's power supply before connecting the

appliance.

If in doubt, consult a qualified electrician.



Do not use a power bar or extension cord to connect the

ventilation hood to electricity. These are a fire hazard and do not

guarantee the required level of appliance safety.



To ensure safe operation, only use the ventilation hood after it has

been properly installed.



This ventilation hood may not be used in non-stationary locations

(e.g. on a ship).



Adequate ventilation must be provided when the hood is operated

simultaneously with devices that burn gas or other fuels.



Only open the housing as described in the enclosed "Installation

diagram" and in the "Cleaning and care" section of this manual.

Under no circumstances should any other parts of the housing be

opened.

Tampering with electrical connections or components and

mechanical parts is highly dangerous to the user and can cause

operation faults.



If the power cord is damaged, it must only be replaced by a

qualified service technician.

IMPORTANT SAFETY INSTRUCTIONS