Miele DA 239-3 Instructions d'utilisation et d'installation - Page 16

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 239-3. Miele DA 239-3 40 pages. Ventilation system
Également pour Miele DA 239-3 : Instructions d'utilisation et d'installation (40 pages)

Imprimer la page

The reusable metal grease filters

remove solid particles from the vented

kitchen air (grease, dust, etc).

The grease filters should be cleaned

every 3 - 4 weeks or whenever the

grease filter indicator lights.

A dirty filter is a fire hazard.

^ To remove the grease filters press the

locking clips in towards the middle of

the filter. Holding carefully, lower and

remove the filter.

^ Clean the filters

use a scrub brush in

warm water with a mild detergent.

vertically in the lower basket, making

sure that the spray arm is not

blocked.

Depending on the detergent,

cleaning the grease filters in a

dishwasher may cause permanent

discoloration of the filter surface.

Performance of the filter will not be

affected by this discoloration.

^ After cleaning, the filters can be

placed on a towel to air dry.

^ While the filters are removed, clean

any dirt or grease from the filter

casing to prevent the risk of fire.

When putting the grease filters back

make sure that the locking clips are

visible facing down towards the

cooking surface.

If the filters are incorrectly installed,

insert a small screwdriver into the slit

along its edge to disengage it from the

casing.

^ After returning the grease filters,

press the grease filter button for 3

seconds to reset the timer. The

indicator light will go out.

^ If the grease filters are cleaned

before the grease filter timer has

reached its maximum, the grease

filter button should be pressed for

6 seconds to reset the counter to

zero.

place the filters