Miele DA 249-4 Instructions d'utilisation et d'installation - Page 24

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 249-4. Miele DA 249-4 40 pages. Ventilation system
Également pour Miele DA 249-4 : Instructions d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (44 pages)

Cleaning and care

^ After cleaning, leave the filters to dry

for a while on an absorbent surface

before putting them back in place.

^ When removing the filters for

cleaning, also clean off any residues

of oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

^ After cleaning the filters, press the

grease filter control for approximately

3 seconds to reset the operating

hours counter.

The indicator lamp will go out.

If the stainless steel outer filter and the

grease filter are cleaned before the

operating hours counter has reached

its maximum, the grease filter control

should be pressed for approximately 6

seconds to reset the counter to zero.

To replace the grease filter

^ Holding the grease filter at an angle,

fit it into the front of the chimney and

then push it into position along the

front edge.

^ Then push it up into position at the

back, making sure it clicks into

position on both sides.

To replace the stainless steel outer

filter

^ Fit the outer filter into the appliance

so that it hooks into the retainers at

the back, then push it upwards at the

front and make sure it engages in the

quick-release mechanism.