Miele DA 270-4 U Alu Instructions d'utilisation et d'installation - Page 21

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 270-4 U Alu. Miele DA 270-4 U Alu 36 pages. Cooker
Également pour Miele DA 270-4 U Alu : Instructions d'utilisation et d'installation (36 pages)

Imprimer la page

Before any cleaning or maintenance

work is carried out, disconnect the

cooker hood from the mains supply.

Ensure that:

it is switched off at the isolator,

the fuse from the fused spur

connection unit is withdrawn,

the mains fuse is disconnected,

the screw-out fuse is removed

(in countries where this is

applicable).

E-Cloth

^ A microfibre "E-Cloth" is available

from the Miele UK Spare Parts

Department, which is suitable for

cleaning surfaces such as stainless

steel, glass, plastic and chrome

without the use of chemicals. It can

be washed 300 times.

Housing

General notes

The surfaces and controls are

susceptible to scratches and

abrasions. Please observe the

following cleaning instructions.

^ All external surfaces and controls can

be cleaned using a Miele E-Cloth, or

with warm water and a little

washing-up liquid applied with a well

wrung-out soft sponge or cloth.

^ Wipe the surfaces dry using a soft

cloth.

Cleaning and care

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Do not use:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents e.g.

powder cleaners or cream cleaners,

and abrasive sponges, e.g. pot

scourers or sponges which have

been previously used with abrasive

cleaning agents. These will damage

the surface material.

Important for appliances with

stainless steel housing

(This infomation does not apply to the

controls).

Stainless steel surfaces can be cleaned

using the Miele E-Cloth, or with a

proprietary non-abrasive cleaning

agent designed specifically for use on

stainless steel.

To help prevent re-soiling, a

conditioning agent for stainless steel

such as Neoblank (available from the

Miele UK Spare Parts Department) can

also be used. Follow the manufacturer's

instructions on the packaging.