Miele DA 3160 EXT Instructions d'utilisation et d'installation - Page 25

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 3160 EXT. Miele DA 3160 EXT 40 pages. Cooker hoods
Également pour Miele DA 3160 EXT : Instructions d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (40 pages)

= Depth of carcase

appliance

^ The depth of appliance

on the lightshield being used:

– a Lightshield to match existing

kitchen furniture

– b DFB lightshield (optional

accesssory)

– c No lightshield.

This is based on a lightshield which

aligns with the front edge of the

carcase.

If the lightshield is further forward or

back, measurement

adjusted accordingly.

When installing a shelf or partition wall,

the building-in space at the back must

not be less than 180 mm.

If it is less than 180 mm, position the

appliance further back, and reduce

measurement

accordingly. The

building-in position can be rectified

later by adjusting the depth.

^ Cut the spacer strip supplied to

measurement

Score along the groove for the

measurement as shown, and

remove the surplus.

minus depth of

depends

will need to be

^ Screw the spacer strip to the bottom

of the sides of the housing, flush with

the rear wall.

^ Draw a vertical line up both inside

walls of the housing from the front of

the spacer strip.