Miele DA 3460 Manuel d'utilisation et d'installation - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 3460. Miele DA 3460 40 pages. Ventilation system
Également pour Miele DA 3460 : Manuel d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (40 pages), Manuel d'instructions d'installation (24 pages)

^ Remove the protective film between

the deflector plate and the casing.

^ Secure the front of the appliance to

the floor of the housing unit from

below using 4 screws (6 screws for

90 cm wide cooker hood).

To avoid damaging the deflector plate

when it is pulled out, care should be

taken to screw the fixing screws in

straight, and to ensure that the

screwheads are countersunk.

^ Secure the spacer strip to the back of

the appliance from behind using

4 plastic rivets as shown.

Attaching the lightshield

^ Attach the lightshield (if using).

A DML 400 installation kit, available as

an optional accessory, is required for

this (available as a special accessory).

Follow the installation instructions

supplied.

Weight of a lightshield matching

existing furniture

The lightshield must not exceed 1300 g

in weight.

This applies to lightshields with a depth

of up to 30 mm.

For larger or heavier lightshields, the

weight must be reduced by e.g.

machining it away at the back.

Installation