Miele DA 3466 Instructions d'utilisation et d'installation - Page 22

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 3466. Miele DA 3466 48 pages.
Également pour Miele DA 3466 : Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages)

Miele DA 3466 Instructions d'utilisation et d'installation
Cleaning and care
Cleaning the grease filter by hand
 Clean the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degreaser sprays
– Oven sprays
Cleaning the grease filter in a
dishwasher
 Place the filters as upright or inclined
as possible in the lower basket.
Ensure that the spray arm is not
obstructed.
 Use a common dishwashing
detergent.
 Select a program with a wash
temperature between 120°F (50°C)
and 150°F (65°C). In a Miele
dishwasher use the "Normal"
program.
Depending on the cleaning agent
used, cleaning the grease filter in a
dishwasher can cause permanent
discoloration to the surface. However,
this will not affect the functioning of
the filter in any way.
22
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the filter for cleaning,
also clean off any residues of oil or fat
from the now accessible casing to
prevent the risk of these catching fire.
Installing the grease filter
 When installing the grease filter, make
sure that the red plastic guides are at
the front and facing upwards.
 Place the grease filter in the front of
the fume deflector, press it upwards
and push it in together with the fume
deflector. It will slide onto the
retaining pins at the back. Finally,
push the grease filter back a little
more.