Miele DA 3466 Instructions d'utilisation et d'installation - Page 24

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 3466. Miele DA 3466 48 pages.
Également pour Miele DA 3466 : Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages)

Cleaning and care

Changing a lamp

The lamps should be replaced with the

following:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 12981

Wattage ........................................... 3 W

These lamps are available from Miele or

from specialist retailers.

 Pull out the deflector plate, and

remove the grease filter as described

earlier.

 Switch off the fan and the lighting.



Note that lamps become hot

when in use.

Allow the lamps to cool down for a

few minutes before changing them.

 Remove the charcoal filter if the

rangehood is being used in

recirculation mode.

 Disconnect the rangehood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Push down the lighting unit slightly

via the opening in the safety panel.

 Turn the lamp anti-clockwise and pull

it out.

 Screw the new lamp into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.

 Replace the grease filter and, if being

used in recirculation mode, the

charcoal filter.