Miele DA 3496 Instructions d'utilisation et d'installation - Page 18
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 3496. Miele DA 3496 48 pages.
Également pour Miele DA 3496 : Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages), Instructions d'utilisation et d'installation (48 pages)
Operation
Power management
The rangehood is fitted with a Power
management system. The Power
management system is designed to
help save energy. It ensures that the fan
power level is reduced automatically
and that the lighting is switched off.
- If the Booster setting has been
selected, the fan will automatically
switch to setting 3 after 5 minutes.
- From fan power levels 3, 2 and 1, the
power will be reduced by one level
after 2 hours and then in 30-minute
stages until the fan finally switches
off.
- The cooktop lighting will switch off
automatically after 12 hours.
Switching Power management on/off
You can deactivate the Power
management.
Keep in mind that this may increase
energy consumption.
To set this option, both the fan and
the cooktop lighting must be
switched off.
Press the and controls at the
same time for approx. 10 seconds,
until 1 lights up.
Then press in turn:
- the lighting control ,
- then the touch control, and
- the lighting control again.
18
If Power management is switched on,
the 1 and B indicators light up
constantly.
When it is switched off, the 1 and B
indicators flash.
Press to switch Power
management off.
The 1 and B indicators will flash.
To switch it on, press .
The 1 and B indicators will light up
constantly.
Confirm your choice with the On/Off
control .
All the indicator lights will go out.
If you don't confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
Safety switch-off
If Power management has been
deactivated, the rangehood will switch
itself off automatically after 12 hours if it
has been left on (fan and cooktop
lighting).
To switch it back on press the On/
Off control or the lighting
control .