Miele DA 372 Manuel d'utilisation et d'installation - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 372. Miele DA 372 32 pages. Cooker
Imprimer la page
Before any cleaning or maintenance
work is carried out, disconnect the
cooker hood from the mains supply.
Ensure that
-
it is switched off at the wall socket
and the plug is withdrawn, or
-
or the fuse is withdrawn from the
fused spur connection unit, or
-
the mains fuse is withdrawn,or
-
or the screw-out fuse is removed
(in countries where this is
applicable)
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using warm water with a
little washing-up liquid applied with a
well wrung-out soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Avoid:
– cleaning agents containing soda,
acids, chlorides or solvents,
16
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents.
These will damage the surface
material.
The controls may suffer
discolouration or damage if soiling is
left on them for too long.
Remove any soiling straight away.
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.
The re-usable metal grease filter in the
appliance removes solid particles from
the kitchen vapours (grease, dust, etc)
preventing soiling of the cooker hood.
The grease filter should be cleaned
regularly (at least every 3-4 weeks) to
avoid a built-up of fat but always clean
immediately the grease filter touch
control lamp comes on.
An oversaturated filter is a fire
hazard.