Miele DA 400 Manuel d'utilisation et d'installation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 400. Miele DA 400 36 pages. Cooker
Également pour Miele DA 400 : Instructions d'utilisation et d'installation (36 pages)

Imprimer la page

1. Description of the Appliance

Cleaning and care

Cleaning the grease filters in the

dishwasher

^ Place the filters as upright as

possible in the lower basket, with the

short sides upright, and wash on a

65°C programme, ensuring the spray

arm is not obstructed. If a Miele

dishwasher is being used, select the

Sensor wash programme.

^ Use a mild dishwasher detergent.

Depending on the cleaning agent

used, cleaning the filters in a

dishwasher can cause permanent

discolouration to the surface.

However, this will not affect the

functioning of the filters in any way.

^ After cleaning, leave the filters to dry

on an absorbent surface before

replacing them.

^ When removing the filters for

cleaning, also clean off any residues

of oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

When putting the grease filters back

in position, ensure that the locking

clips are facing down towards the

hob.

If the grease filters are inadvertently

replaced upside down, insert a small

screwdriver blade into the slits to

disengage the clip.

^ After replacing the grease filters,

press the grease filter touch control

for approx. 3 seconds to re-set the

operating hours counter.

The indicator lamp will go out.

If the grease filters are cleaned before

the operating hours counter has

reached its maximum, the grease filter

touch control should be pressed for

approx. 6 seconds to reset the counter.