Miele DA 409 Instructions d'utilisation et d'installation - Page 33

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 409. Miele DA 409 36 pages. Ventilation system
Également pour Miele DA 409 : Instructions d'utilisation et d'installation (36 pages), Instructions d'installation (1 pages), Dimensions du produit (2 pages), Manuel d'utilisation et d'installation (40 pages), Instructions d'utilisation et d'installation (36 pages), Instructions d'utilisation et d'installation (36 pages), Instructions d'utilisation et d'installation (36 pages)

Imprimer la page
Miele DA 409 Instructions d'utilisation et d'installation
,
Please read and follow the
personal injury. Follow all local building
codes when installing the hood.
to reduce the risk of
– The ducting should be as short and
straight as possible, and the number
of sharp bends should be minimized.
– For efficient air extraction, the
diameter of the ductwork should not
be less than 6" (150 mm). Use of flat
ducts also reduces the air extraction
efficiency.
– Noise levels of the hood will increase
if flat ducts or round ducts of less
than 6" (150 mm) in diameter are
used.
– Use smooth or flexible pipes made
from approved non-flammable
materials for exhaust ducting.
– Where the ductwork is horizontal, it
must slope away from the hood at
1
least
/
" per foot (1 cm per meter) to
8
prevent condensation from dripping
into the appliance.
– If the exhaust is ducted through an
outside wall, a Miele Telescopic Wall
Vent can be used.
33