Miele DA 5990 W EXT Instructions d'utilisation et d'installation - Page 19

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Miele DA 5990 W EXT. Miele DA 5990 W EXT 36 pages. Rangehood da 5960 w; da 5990 w; da 5990 w ext
Également pour Miele DA 5990 W EXT : Instructions d'utilisation et d'installation (36 pages), Instructions d'utilisation et d'installation (36 pages), Diagramme d'installation (2 pages), Instructions d'utilisation et d'installation (36 pages), Instructions d'utilisation et d'installation (36 pages), Diagramme d'installation (2 pages)

Miele DA 5990 W EXT Instructions d'utilisation et d'installation

Changing a halogen lamp

^ Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket
and the plug is withdrawn, or
– the fuse from the fused spur
connection unit is withdrawn, or
– the mains fuse is disconnected, or
– the screw-out fuse is removed (in
countries where this is applicable).
^ Remove the grease filter.
^ Remove the charcoal filter if the
rangehood is being used in
recirculation mode.
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
Cleaning and care
^ To access the halogen lamp, push
the lamp cover gently upwards. The
cover will open and can be pulled
down.
^ Push down the lighting unit slightly
via the opening in the safety panel.
The halogen lamp is now accessible
to be unscrewed anti-clockwise.
^ Replace it with a new halogen lamp
(specification: GU/GZ 10, 230 V,
50 W). Screw the lamp into the
socket and push it upwards.
We recommend only using lamps of the
same specification and also made by
the same manufacturer as the ones
being replaced.
^ Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.
dai2409
19